Hartung-Gorre Verlag
Inh.: Dr.
Renate Gorre D-78465
Konstanz Fon:
+49 (0)7533 97227 Fax: +49 (0)7533 97228 www.hartung-gorre.de
|
S
|
Series in MICROSYSTEMS
edited by P. A. Besse,
J. Brugger,
M. Gijs,
R. S. Popovic,
Ph. Renaud
Vol. 26:
Vahid Fakhfouri
Inkjet Printing and High Aspect
Ratio Structuring for Polymer-based
Micro and Nano Systems
1st Edition
2009, VI, 148 pages. ISBN 3-86628-284-2
ISBN-13: 978-3-86628-284-1
Inkjet
printing of functional materials, photolithography and micromolding
are 3 different techniques largely used in the field of micro-electromechanical
systems (MEMS) with increasing interest for the fabrication of new devices and
the development of new applications. This book provides new insights into each
of these fields and, by combining them, aims to enable the access to new
application fields and to contribute to the advancement of micromachining
technologies in the area of micro-devices with enhanced properties. In
particular, it shall contribute to the cost effective fabrication of hybrid
components made of different functionalized materials.
About
the author:
Vahid Fakhfouri
was born in Tehran, Iran, in 1976. He received his master in Microengineering from Ecole Polytechnique Fédérale de
Lausanne (EPFL), Switzerland, in 2004 after carrying out his master project in
collaboration with Swatch Group. He then joined the Institute of Microengineering at EPFL as a research and teaching
assistant. In 2008, he obtained his Ph.D. for his work on Inkjet Printing and
High Aspect Ratio Structuring for Polymer-based Micro and Nano Systems.
Keywords: Inkjet Printing
Direkt bestellen bei / to order directly from: Hartung.Gorre@t-online.de
Hartung-Gorre
Verlag / D-78465 Konstanz / Germany
Telefon: +49 (0) 7533 97227 Telefax: +49 (0) 7533 97228
http://www.hartung-gorre.de eMail: verlag@hartung-gorre.de